All Test Methods
ASTM
Standard Test Method for Penetration of Bituminous Materials
Standard Test Method for Flash Point by Tag Closed Cup Tester
Standard Test Method for Distillation of Petroleum Products and Liquid Fuels at Atmospheric Pressure
Standard Test Method for Precipitation Number of Lubricating Oils
Standard Test Method for Flash and Fire Points by Cleveland Open Cup Tester
Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester
Standard Test Methods for Water and Sediment in Crude Oil by Centrifuge Method (Field Procedure) (Withdrawn 2000)
Standard Test Method for Pour Point of Petroleum Products
Standard Test Method for Corrosiveness to Copper from Petroleum Products by Copper Strip Test
Standard Specification for Distillation Equipment
Standard Test Method for Saybolt Color of Petroleum Products (Saybolt Chromometer Method)
Standard Test Method for Conradson Carbon Residue of Petroleum Products
Standard Test Method for Water Using Volumetric Karl Fischer Titration
Standard Test Methods for Cone Penetration of Lubricating Grease
Standard Practice for Computing the Colors of Objects by Using the CIE System
Standard Test Method for Vapor Pressure of Petroleum Products (Reid Method)
Standard Test Method for Gum Content in Fuels by Jet Evaporation
Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity)
Standard Specifications and Operating Instructions for Glass Capillary Kinematic Viscometers
Standard Test Method for Selection and Use of ASTM Standards for the Determination of Flash Point of Chemicals by Closed Cup Methods
Standard Test Method for Ramsbottom Carbon Residue of Petroleum Products
Standard Test Method for Oxidation Stability of Gasoline (Induction Period Method)
Standard Test Methods for Aniline Point and Mixed Aniline Point of Petroleum Products and Hydrocarbon Solvents
Standard Test Method for Cetane Number of Diesel Fuel Oil
Standard Test Method for Acid Number of Petroleum Products by Potentiometric Titration
Standard Test Method for Rust-Preventing Characteristics of Inhibited Mineral Oil in the Presence of Water
Standard Test Method for Adhesion and Cohesion of Elastomeric Joint Sealants Under Cyclic Movement (Hockman Cycle)
Standard Test Method for Oil Content of Petroleum Waxes
Standard Test Method for Extension-Recovery and Adhesion of Latex Sealants
Standard Test Method for Distillation of Industrial Aromatic Hydrocarbons and Related Materials
Standard Test Method for Oxidation Stability of Aviation Fuels (Potential Residue Method)
Standard Test Method for Dielectric Breakdown Voltage of Insulating Liquids Using Disk Electrodes
Standard Test Method for Foaming Characteristics of Lubricating Oils
Standard Test Method for Insolubles in Used Lubricating Oils
Standard Test Method for Bond and Cohesion of One-Part Elastomeric Solvent Release-Type Sealants
Standard Test Method for Cone Penetration of Petrolatum
Standard Test Method for Oxidation Characteristics of Inhibited Mineral Oils
Standard Specification for Diesel Fuel
Standard Test Method for Distillation Range of Volatile Organic Liquids
Standard Test Method for Reserve Alkalinity of Engine Coolants and Antirusts
Standard Test Method for Relative Density of Engine Coolant Concentrates and Engine Coolants By The Hydrometer
Standard Test Method for Bromine Numbers of Petroleum Distillates and Commercial Aliphatic Olefins by Electrometric Titration
Standard Test Method for Distillation of Petroleum Products at Reduced Pressure
Standard Test Method for Color of Clear Liquids (Platinum-Cobalt Scale)
Standard Test Method for Determining the Water Washout Characteristics of Lubricating Greases
Standard Test Method for Gauge Vapor Pressure of Liquefied Petroleum (LP) Gases (LP-Gas Method)
Standard Test Method for Sediment in Water-Emulsion Polishes by Centrifuge
Standard Test Method for Crack Bridging Ability of Liquid-Applied Waterproofing Membrane
Standard Test Method for Flash Point and Fire Point of Liquids by Tag Open-Cup Apparatus
Standard Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption
Standard Test Method for Needle Penetration of Petroleum Waxes
Standard Test Method for Smoke Point of Kerosene and Aviation Turbine Fuel
Standard Test Method for Water in Volatile Solvents (Karl Fischer Reagent Titration Method)
Standard Test Method for Water Separability of Petroleum Oils and Synthetic Fluids
Standard Test Methods for Cone Penetration of Lubricating Grease Using One-Quarter and One-Half Scale Cone Equipment
Standard Test Method for Density and Relative Density (Specific Gravity) of Viscous Materials by Bingham Pycnometer
Standard Test Method for ASTM Color of Petroleum Products (ASTM Color Scale)
Standard Test Method for Water in Insulating Liquids by Coulometric Karl Fischer Titration
Standard Specification for Aviation Turbine Fuels
Standard Test Method for Density or Relative Density of Light Hydrocarbons by Pressure Hydrometer
Standard Test Method for Luminometer Numbers of Aviation Turbine Fuels (Withdrawn 2006)
Standard Test Method for Water and Sediment in Fuel Oils by the Centrifuge Method (Laboratory Procedure)
Standard Test Method for Dielectric Breakdown Voltage of Insulating Liquids Using VDE Electrodes
Standard Test Method for Roll Stability of Lubricating Grease
Standard Test Method for Copper Strip Corrosion by Liquefied Petroleum (LP) Gases
Standard Test Method for Determining Filter Blocking Tendency
Standard Practice for Basic Calibration of Master Viscometers and Viscosity Oil Standards
Standard Test Method for Kinematic Viscosity of Asphalts
Standard Test Method for Dropping Point of Lubricating Grease Over Wide Temperature Range
Standard Test Method for Wear Preventive Characteristics of Lubricating Grease (Four-Ball Method)
Standard Practice for Calculating Viscosity Index from Kinematic Viscosity at 40°C and 100°C
Standard Test Method for Trace Sediment in Lubricating Oils
Standard Test Method for Oxidation Stability of Distillate Fuel Oil (Accelerated Method)
Standard Test Method for Particulate Contaminant in Aviation Fuel by Line Sampling
Standard Test Method for Freezing Point of Aviation Fuels
Standard Practice for Condition Monitoring of In-Service Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry
Standard Test Method for Cloud Point of Petroleum Products and Liquid Fuels
Standard Test Method for Measurement of Extreme-Pressure Properties of Lubricating Grease (Four-Ball Method)
Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry
Standard Test Methods for Electrical Conductivity of Aviation and Distillate Fuels
Standard Test Method for Water and Sediment in Middle Distillate Fuels by Centrifuge
Standard Test Method for Bromine Index of Petroleum Hydrocarbons by Electrometric Titration
Standard Test Method for Demulsibility Characteristics of Lubricating Oils
Standard Test Method for Dryness of Propane (Valve Freeze Method)
Standard Test Method for Measurement of Extreme-Pressure Properties of Lubricating Fluids (Four-Ball Method)
Standard Test Method for Effect of Heat and Air on a Moving Film of Asphalt (Rolling Thin-Film Oven Test)
Standard Test Method for Yield Stress of Heterogeneous Propellants by Cone Penetration Method (Withdrawn 2017)
Standard Test Method for Base Number of Petroleum Products by Potentiometric Perchloric Acid Titration
Standard Test Method for Low-Temperature Viscosity of Automatic Transmission Fluids, Hydraulic Fluids, and Lubricants using a Rotational Viscometer
Standard Test Method for Flash Point of Cutback Asphalt with Tag Open-Cup Apparatus
Standard Test Method for (Thiol Mercaptan) Sulfur in Gasoline, Kerosine, Aviation Turbine, and Distillate Fuels (Potentiometric Method)
Standard Test Method for Salts in Crude Oil (Electrometric Method)
Standard Test Method for Acidity in Aviation Turbine Fuel
Standard Test Methods for Flash Point of Liquids by Small Scale Closed-Cup Apparatus (Withdrawn 2020)
Standard Test Method for Air Release Properties of Hydrocarbon Based Oils
Standard Test Method for Rust-Preventing Characteristics of Steam Turbine Oil in the Presence of Water (Horizontal Disk Method)
Standard Practice for Obtaining LPG Samples Using a Floating Piston Cylinder
Standard Test Methods for Flash Point by Small Scale Closed Cup Tester
Standard Test Method for Oil and Grease and Petroleum Hydrocarbons in Water (Withdrawn 2013)
Standard Test Method for Water and Sediment in Crude Oil by the Centrifuge Method (Laboratory Procedure)
Standard Test Method for Detection of Copper Corrosion from Lubricating Grease
Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter
Standard Practice for Manual Sampling of Petroleum and Petroleum Products
Standard Test Method for Wear Preventive Characteristics of Lubricating Fluid (Four-Ball Method)
Standard Test Method for Sustained Burning of Liquid Mixtures Using the Small Scale Open-Cup Apparatus
Standard Test Method for Oil and Grease (Fluorocarbon Extractable Substances) by Gravimetric Determination (Withdrawn 2012)
Standard Test Method for Sulfur in Petroleum and Petroleum Products by Energy Dispersive X-ray Fluorescence Spectrometry
Standard Practice for Aviation Fuel Sample Containers for Tests Affected by Trace Contamination
Standard Test Method for Determination of Sludging and Corrosion Tendencies of Inhibited Mineral Oils
Standard Test Method for Water in Crude Oils by Potentiometric Karl Fischer Titration
Standard Test Method for Determination of Carbon Residue (Micro Method)
Standard Test Method for Base Number Determination by Potentiometric Hydrochloric Acid Titration
Standard Test Method for Sediment in Crude Oil by Membrane Filtration
Standard Specification for Automotive Spark-Ignition Engine Fuel
Standard Test Method for Determination of Total Sediment in Residual Fuels
Standard Test Method for Water in Crude Oils by Coulometric Karl Fischer Titration
Standard Classification and Specification for Automotive Service Greases
Standard Test Method for Vapor Pressure of Gasoline and Gasoline-Oxygenate Blends (Dry Method)
Standard Test Method for Measurement of Lubricity of Aviation Turbine Fuels by the Ball-on-Cylinder Lubricity Evaluator (BOCLE)
Standard Test Method for Density, Relative Density, and API Gravity of Crude Oils by Digital Density Analyzer
Standard Test Methods for Lead and Manganese in Gasoline by X-Ray Fluorescence Spectroscopy
Standard Test Method for Multielement Determination of Used and Unused Lubricating Oils and Base Oils by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
Standard Test Method for Vapor-Liquid Ratio Temperature Determination of Fuels (Evacuated Chamber and Piston Based Method)
Standard Test Method for Vapor Pressure of Petroleum Products and Liquid Fuels (Mini Method)
Standard Test Method for Assessing Middle Distillate Fuel Storage Stability by Oxygen Overpressure
Standard Test Methods for Sealants and Fillers, Hot-Applied, for Joints and Cracks in Asphalt Pavements and Portland Cement Concrete Pavements
Standard Test Method for Color of Liquids Using Tristimulus Colorimetry
Standard Test Method for Particulate Contamination in Aviation Fuels by Laboratory Filtration
Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Spark Ignition Engine Fuel, Diesel Engine Fuel, and Engine Oil by Ultraviolet Fluorescence
Standard Test Method for Measurement of Hydrogen Sulfide in the Vapor Phase Above Residual Fuel Oils
Standard Test Method for Bromine Index of Aromatic Hydrocarbons by Electrometric Titration
Standard Test Method for Determination of MTBE, ETBE, TAME, DIPE, Methanol, Ethanol and tert-Butanol in Gasoline by Infrared Spectroscopy
Standard Test Method for Evaluating Resistance of Modified Bituminous Roofing Membrane to Cyclic Fatigue (Joint Displacement)
Standard Test Method for Pour Point of Crude Oils
Standard Test Method for Measurement of Total Hydrogen Sulfide in Residual Fuels by Multiple Headspace Extraction and Sulfur Specific Detection
Standard Test Method for Color of Petroleum Products by the Automatic Tristimulus Method
Standard Guide for Characterizing Hydrocarbon Lubricant Base Oils
Standard Test Method for Evaluating Lubricity of Diesel Fuels by the High-Frequency Reciprocating Rig (HFRR)
Standard Test Method for High Temperature Foaming Characteristics of Lubricating Oils
Standard Specification for Mineral Hydraulic Oils
Standard Test Method for Particulate Contamination in Middle Distillate Fuels by Laboratory Filtration
Standard Test Method for Determination of Benzene in Spark-Ignition Engine Fuels Using Mid Infrared Spectroscopy
Standard Test Method for Determination of Water in Petroleum Products, Lubricating Oils, and Additives by Coulometric Karl Fischer Titration
Standard Test Method for Cold Filter Plugging Point of Diesel and Heating Fuels
Standard Test Method for Determination of Vapor Pressure of Crude Oil: VPCRx (Expansion Method)
Standard Test Method for Determination of Vapor Pressure (VPX) of Petroleum Products, Hydrocarbons, and Hydrocarbon-Oxygenate Mixtures (Triple Expansion Method)
Standard Test Method for Flash Point by Continuously Closed Cup (CCCFP) Tester
Standard Test Method for Determination of Phosphorus, Sulfur, Calcium, and Zinc in Lubrication Oils by Energy Dispersive X-ray Fluorescence Spectroscopy
Standard Practice for Accelerated Aging of Asphalt Binder Using a Pressurized Aging Vessel (PAV)
Standard Test Method for Determination of Asphaltenes (Heptane Insolubles) in Crude Petroleum and Petroleum Products
Standard Test Method for Determination of Wear Metals and Contaminants in Used Lubricating Oils or Used Hydraulic Fluids by Rotating Disc Electrode Atomic Emission Spectrometry
Standard Test Method for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
Standard Specification for Joint and Crack Sealants, Hot Applied, for Concrete and Asphalt Pavements
Standard Test Method for Determination of Contaminants in Gas Turbine and Diesel Engine Fuel by Rotating Disc Electrode Atomic Emission Spectrometry
Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels
Standard Test Method for Coulometric and Volumetric Determination of Moisture in Plastics Using the Karl Fischer Reaction (the Reaction of Iodine with Water)
Standard Test Method for Pour Point of Petroleum Products (Robotic Tilt Method)
Standard Test Method for Vapor Pressure of Liquefied Petroleum Gases (LPG) (Expansion Method)
Standard Test Method for Sulfur in Gasoline, Diesel Fuel, Jet Fuel, Kerosine, Biodiesel, Biodiesel Blends, and Gasoline-Ethanol Blends by Monochromatic Wavelength Dispersive X-ray Fluorescence Spectrometry
Standard Test Method for dimer/trimer of chlorotrifluoroethylene (S-316) Recoverable Oil and Grease and Nonpolar Material by Infrared Determination
Standard Test Method for Flash Point by Modified Continuously Closed Cup (MCCCFP) Tester
Standard Test Method for Sulfur in Automotive, Heating, and Jet Fuels by Monochromatic Energy Dispersive X-ray Fluorescence Spectrometry
Standard Test Method for Flash Point by Small Scale Closed Cup Tester (Ramp Method)
Standard Test Method for Prolonged Worked Stability of Lubricating Grease in Presence of Water (Water Stability Test)
Standard Test Method for Distillation of Petroleum Products and Liquid Fuels at Atmospheric Pressure (Micro Distillation Method)
Standard Test Method for Condition Monitoring of Phosphate Antiwear Additives in In-Service Petroleum and Hydrocarbon Based Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry
Standard Test Method for Condition Monitoring of Oxidation in In-Service Petroleum and Hydrocarbon Based Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry
Standard Test Method for Condition Monitoring of Sulfate By-Products in In-Service Petroleum and Hydrocarbon Based Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry
Standard Practice for Set-Up and Operation of Fourier Transform Infrared (FT-IR) Spectrometers for In-Service Oil Condition Monitoring
Standard Test Method for Oxidation Stability of Biodiesel (B100) and Blends of Biodiesel with Middle Distillate Petroleum Fuel (Accelerated Method) (Withdrawn 2016)
Standard Specification for Diesel Fuel Oil, Biodiesel Blend (B6 to B20)
Standard Test Method for Determination of Fuel Filter Blocking Potential of Biodiesel (B100) Blend Stock by Cold Soak Filtration Test (CSFT)
Standard Test Method for Oxidation Stability of Middle Distillate Fuels—Rapid Small Scale Oxidation Test (RSSOT)
Standard Test Method for Sizing and Counting Particles in Light and Middle Distillate Fuels, by Automatic Particle Counter
Standard Test Method for Determination of Hydrogen Sulfide in Fuel Oils by Rapid Liquid Phase Extraction
Standard Test Method for Condition Monitoring of Nitration in In-Service Petroleum and Hydrocarbon-Based Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry
Standard Test Method for Automatic Particle Counting of Lubricating and Hydraulic Fluids Using Dilution Techniques to Eliminate the Contribution of Water and Interfering Soft Particles by Light Extinction
Standard Test Method for Determination of Corrosiveness to Silver by Automotive Spark-Ignition Engine Fuel—Thin Silver Strip Method
Standard Test Method for Corrosiveness to Silver by Automotive Spark–Ignition Engine Fuel–Silver Strip Method
Standard Test Method for Total Oil and Grease (TOG) and Total Petroleum Hydrocarbons (TPH) in Water and Wastewater with Solvent Extraction using Mid-IR Laser Spectroscopy
Standard Test Method for Evaluating Lubricity of Diesel Fuels by the High-Frequency Reciprocating Rig (HFRR) by Visual Observation
Standard Test Method for Density, Relative Density, or API Gravity of Liquid Petroleum by Portable Digital Density Meter
Standard Test Method for Determination of the Fatty Acid Methyl Esters Content of Aviation Turbine Fuel Using Flow Analysis by Fourier Transform Infrared Spectroscopy—Rapid Screening Method
Standard Test Method for Determination of the Fatty Acid Methyl Ester (FAME) Content of a Blend of Biodiesel and Petroleum-Based Diesel Fuel Oil Using Mid-Infrared Spectroscopy
Standard Test Method for Determination of Contamination Level of Fatty Acid Methyl Esters in Middle Distillate and Residual Fuels Using Flow Analysis by Fourier Transform Infrared Spectroscopy—Rapid Screening Method
Standard Test Method for Determination of Vapor Pressure of Crude Oil: VPCRx-F (Tm°C) (Manual Expansion Field Method)
Standard Test Method for Total Water in Liquid Butane by Liquefied Gas Sampler and Coulometric Karl Fischer Titration
Standard Practice for Manual Piston Cylinder Sampling for Volatile Crude Oils, Condensates, and Liquid Petroleum Products
Standard Test Method for Roll Stability of Lubricating Grease in Presence of Water (Wet Roll Stability Test)
Standard Test Method for Ferrous Debris Quantification
Standard Test Method for Finite Flash Point Determination of Liquid Wastes by Small-Scale Closed Cup Tester
Standard Test Method for Determination of Indicated Cetane Number (ICN) of Diesel Fuel Oils using a Constant Volume Combustion Chamber—Reference Fuels Calibration Method
Standard Test Method for Total Oil and Grease (TOG) and Total Petroleum Hydrocarbon (TPH) in Water and Wastewater with Solvent Extraction Using Non-Dispersive Mid-IR Transmission Spectroscopy
Standard Practice for Preparing an Equilibrium Liquid/Vapor Sample of Live Crude Oil, Condensates, or Liquid Petroleum Products Using a Manual Piston Cylinder for Subsequent Liquid Analysis or Gas Analysis
Standard Test Method for Vanadium and Nickel in Crude and Residual Oil by X-ray Spectrometry
Standard Test Method for Determination of Biodiesel (Fatty Acid Methyl Esters) Content in Diesel Fuel Oil by Portable Rapid Mid-Infrared Analyzer
CGSB
Cold soak filter blocking tendency of biodiesel (B100)
IP
Petroleum products and hydrocarbon solvents - Determination of aniline point and mixed aniline point
Determination of carbon residue - Conradson method
Determination of carbon residue - Ramsbottom method
Determination of pour point
Determination of the freezing point of aviation fuels — Manual method
Determination of flash point — Pensky-Martens closed cup method
Determination of flash and fire points - Cleveland open cup method
Determination of oxidation stability of gasoline - Induction period method
Determination of the ignition quality of diesel fuels — Cetane engine method
Bitumen and bituminous binders - determination of needle penetration
Determination of cone penetration of lubricating grease
Determination of vapour pressure - Reid method
Transparent and opaque liquids - Determination of kinematic viscosity and calculation of dynamic viscosity
Determination of corrosiveness to copper of lubricating grease - Copper strip method copy
Determination of oil separation from lubricating grease - Pressure filtration method
Determination of distillation characteristics at atmospheric pressure
Gum content of light and middle distillate fuels - Jet evaporation method
Determination of rust-preventing characteristics of steam-turbine oil in the presence of water
Determination of oxidation stability of aviation fuel Potential residue method copy
Determination of foaming characteristics of lubricating oils
Corrosiveness to copper - Copper strip test
Determination of the oxidation stability of inhibited mineral oils (the TOST test)
Determination of flash point - Abel closed-cup method
Determination of cone penetration of petrolatum
Determination of distillation characteristics of volatile organic liquids
Determination of colour (ASTM scale)
Determination of water washout characteristics of lubricating grease
Determination of particulate contaminant of aviation turbine fuels by line sampling
Determination of cloud point
Calculation of viscosity index from kinematic viscosity
Determination of corrosiveness to silver of aviation turbine fuels - Silver strip method
Determination of extreme pressure and anti-wear properties of lubricating fluids and greases - Four ball method (European conditions)
Determination of total salts content of crude oil - Conductivity method
Determination of electrical conductivity of aviation and distillate fuels
Determination of flash point - Closed cup equilibrium method
Diesel and domestic heating fuels - Determination of cold filter plugging point copy
Determination of cone penetration of grease - One-quarter and one-half scale cone method
Determination of air release value of lubricating and hydraulic oils
Bitumen and bituminous binders - Determination of kinematic viscosity aromatic hydrocarbon types in middle distillates - High performance liquid chromatography method with refractive index detection
Determination of sulfur content - Energy-dispersive-X-ray fluorescence method
Determination of thiol (mercaptan) sulfur in light and middle distillate fuels - Potentiometric method
Crude petroleum - Determination of water - Potentiometric Karl Fischer titration method
Crude petroleum and petroleum products - Determination of density - Oscillating U-tube method
Total sediment in residual fuel oils - Part 1: Determination by hot filtration
Determination of needle penetration of petroleum wax
Determination of filter blocking tendency
Petroleum products - Determination of the oxidation stability of middle-distillate fuels
Total sediment in residual fuel oils - Part 2: Determination using standard procedures for ageing
Determination of carbon residue - Micro method
Liquefied petroleum gases - Determination of gauge vapour pressure - LPG method
Liquefied petroleum gases - Corrosiveness to copper - Copper strip test
Determination of water separability of petroleum oils and synthetic fluids
Determination of particulate content of middle distillate fuels - Laboratory filtration method
Determination of particulate contaminant in aviation turbine fuels by laboratory filtration
Liquid petroleum products - Determination of contamination in middle distillates
Determination of the pour point of crude petroleum
Diesel fuel – Assessment of lubricity using the high‑frequency reciprocating rig (HFRR) – Part 1: Test method (ISO 12156‑1:2018)
Determination of the water content of distillate petroleum products - Potentiometric Karl Fischer titration method
Determination of the sulfur content of automotive fuels - Energy-dispersive X-ray fluorescence spectrometry
Determination of flash point - Rapid equilibrium closed cup method (ISO 3679:2004)
Determination of flash/no flash - Rapid equilibrium closed cup method (ISO 3680:2004)
Determination of flash point - Small scale closed cup ramp method
Determination of the existent gum content of aviation turbine fuel - Jet evaporation method
Determination of density of middle distillate fuels - Hand held oscillating U-tube density meter method
Determination of the level of cleanliness of aviation turbine fuel - Portable automatic particle counter method
Determination of hydrogen sulfide in fuel oils — Rapid liquid phase extraction method
Determination of the fatty acid methyl esters content of aviation turbine fuel using flow analysis by Fourier transform infrared spectroscopy – Rapid screening method
Determination of fatty acid methyl esters (FAME), derived from bio-diesel fuel, in aviation turbine fuel - GC-MS with selective ion monitoring/scan detection method
Determination of fatty acid methyl esters (FAME) in aviation turbine fuel - HPLC evaporative light scattering detector method
Determination of Fatty Acid Methyl Esters (FAME) in aviation turbine fuel - Gas Chromatography using heart-cut and refocusing
Determination of sustained combustibility of liquids
Determination of corrosiveness to silver of automotive gasoline - Silver strip method
Determination of generic cetane number (G-CN) of fuels using a constant volume combustion chamber — primary reference fuels calibration (PRFC) method
Determination of cold filter blocking tendency
ISO
Petroleum products — Corrosiveness to copper — Copper strip test
Petroleum products — Determination of foaming characteristics of lubricating oils
Liquefied petroleum gases — Corrosiveness to copper — Copper strip test
Determination of water separability of petroleum oils and synthetic fluids
Determination of rust-preventing characteristics in the presence of water
Petroleum products — Determination of sulfur content — Energy-dispersive X-ray fluorescence spectrometry
Petroleum products — Determination of low concentration of sulfur in automotive fuels — Energy-dispersive X-ray fluorescence spectrometric method
Liquefied petroleum gases — Assessment of the dryness of propane — Valve freeze method
Cleanrooms and associated controlled environments — Part 1: Classification of air cleanliness by particle concentration
Petroleum products — Determination of sulfur content of automotive fuels — Energy-dispersive X-ray fluorescence spectrometry
Determination of particle size distribution — Single particle light interaction methods — Part 4: Light scattering airborne particle counter for clean spaces
Determination of the filterability of lubricating oils — Part 1: Procedure for oils in the presence of water
NACE
Determining Corrosive Properties of Cargoes in Petroleum Product Pipelines
UOP
Hydrogen Sulfide and Mercaptan Sulfur in Liquid Hydrocarbons by Potentiometric Titration
Hydrogen Sulfide, Mercaptan Sulfur, and Carbonyl Sulfide in Hydrocarbon Gases by Potentiometric Titration
Nitrogen Bases in Hydrocarbons by Potentiometric Titration