Low Viscosity Silicone Fluids are widely used as laboratory bath fluids / heat transfer fluids due to their low viscosity, low pour points, low viscosity change at temperature and high dielectric strength. They are particularly effective for baths and systems that have to circulate. Unlike higher viscosity fluids, their viscosities remain low even at extremely low temps. As such, they are easy to circulate and pump.
The low molecular weight and refractive index values of Low Viscosity Pure Silicone Fluids make them widely used in Optics research, LED technologies & Sensor technologies.
Properties
- Low viscosity PDMS Silicone Oils. Viscosities slightly higher than water
- Low pour points (as low as -90°C)
- Wide Service Temperature Range
- Low surface tension fluids (high spreadability)
- Low viscosity change at temperature (low VTC)
- RI Values between 1.3970 to 1.4000
- High Dielectric Strength
- Newtonian behavior under shear
- Excellent Lubricity
- California VOC Exempt...replacement for petroleum based solvents that are not VOC Compliant
Product Data
| Viscosity | Specific Gravity | Pour Point | Flash Point | Refractive Index | V.T.C | Thermal Expansion (cc/cc °C) |
Thermal Conductivity (g/cal/cm/sec °C) |
|---|---|---|---|---|---|---|---|
| 5cSt | 0.918 | -90°C | 135°C | 1.3970 | 0.54 | 0.00109 | 0.00028 |
| 10cSt | 0.818 | -70°C | 163°C | 1.3990 | 0.56 | 0.00108 | 0.00032 |
| 20cSt | 0.853 | -65°C | 232°C | 1.4000 | 0.59 | 0.00107 | 0.00034 |
| Viscosity @ 25°C | 5 cSt |
| Flash Point | 135°C |
| Pour Point | -90°C |
| Service Range (Open System) | -70°C to 65°C |
| Service Range (Closed System) | -70°C to 150°C |
| Temperature Range (Low) | -70°C |
| Temperature Range (High) | 65°C / 150°C |
| Subcategory | Low Viscosity Fluids |
There are no reviews yet
