The Seta Silver and Copper Corrosion Bath is a bench top, stainless steel water or oil bath. Digitally controlled to ±0.1 °C over a temperature range of ambient +5 °C to 150 °C, the bath is used to determine the corrosive effects of fuels, lubricants and other hydrocarbon products on copper and silver.
The bath features 6 test stations, each with a lid and hook for suspending a Corrosion Pressure Vessel (11500-0) or a test tube Support Assembly (11422-0). You can use any combination of copper corrosion vessels and test tube supports for maximum test flexibility.
- Ambient +5 to 150 °C
- 19 litre bath
- 6 test stations
- Programmable digital temperature controller
- Digital timer
- Over temperature cut out and liquid level float switch
- Maximum liquid level outlet fitting
- Small footprint
Additional InfoEase of use:
All functions on the Silver and Copper Corrosion bath are accessed via the dial and indicatoricons are shown on the colour display of the thermostir.
Safety features include a float-operated lowliquid level cut out. Users are made aware if the level of liquid in the bath falls below the allowable level with a warning display on thethermostir screen and an audible alarm, the heater automatically switches off.
An adjustable over-temperature cut out protects theinstrument from overheating. If the bath temperature exceeds the over-temperature cut out temperature, again a warning displays on thethermostir screen, an audible alarm sounds and the heater automatically switches off.
Calibration and verification:
Calibration of the Corrosion Bath can be performed in the field, eliminating the costs and time associated withsending the instrument to a service center.
Service and maintenance:
The rugged design ensures minimal operationalmaintenance is needed.
Supplied with: 6 x lids, mains lead, instruction manual.
Ambient +5 to 150 °C
Water or Oil
6 x 52 mm
110/120 V, 50/60 Hz
51 x 23 x 46 cm
There are no reviews yet