The Autoload Seta-Shell Four Ball Lubricant Tester determines the friction properties of extreme pressure oils and greases. Used in tribology research laboratories and in the routine quality control of finished lubrication products.

A ball, mounted in a chuck, is rotated against three stationary balls in a pot containing the sample lubricant. The digital speed controller has three factory pre-programmed settings which are 1200, 1475 and 1760 rpm. A load, adjustable in the range of 6 to 800 kgF, is applied to the balls via a balance beam and electric jack. The applied load is displayed on a digital readout. The torque transferred between the rotating and stationary balls is measured and displayed. The digital timer, with a range of 0.1 seconds to 9999 hours, can be used to control the duration of the test. If the torque exceeds a preset level, or the balls weld, during a test, power to the drive motor is automatically turned off.

Features

• Drive speed from 1200 to 1760rpm
• Torque measurement and limiting
• Full Digital Control
• Digital displays of applied load, torque, time
• Safety splash guard

Additional Info

The optional Seta Wear Loading Kit (19940-0) allows the user to quickly convert the equipment into a Four Ball Wear Tester for ASTM D2266 and D4172 tests.

Supplied With

• 1000 IP 239 test balls (ISO 683-17, ISO 3290-1 Grade G5)
• Torque wrench with adjusting key and certificate of calibration
• Instruction manual