Setaflash Series 3e ActiveCool provides fast and reliable flash point results and requires minimum operator expertise. It has been designed to rapidly and efficiently carry out Flash / No Flash tests to determine the flash point of liquids and semi-solids in the 10 to 135 °C temperature range.
- Compliance
- Safety
- Product quality
- 2 ml of sample and a result in less than 2 minutes
Designed for precise and accurate tests, barometric pressure is measured by an internal barometer and correction is automatically applied to the test result. Unknown samples can be tested using ramp mode.
Setaflash Series 3 ActiveCool has a very simple user interface with colour digital display and touch screen icons which guide the operator through a straightforward testing process. For easy record keeping the instrument stores test results which can be saved and transferred via a USB port.
The versatile range of Setaflash instruments is ideal for use in the laboratory, production line or for portable test applications.
Features
- Flash / No Flash & Ramp modes
- Electric ignitor
- 10 to 135°C temperature range
- Flash point test in less than 2 minutes
- Small sample size (2 or 4ml)
- Automatic flash detection
- Electronic peltier cooling
- Inbuilt touch screen
- Inbuilt USB port
- Portable operation
- °C or °F display
Additional Information
Rapid Results in just 1 or 2 Minutes
The Setaflash Series 3 ActiveCool is an easy to use instrument that can complete a flash/no flash test in less than two minutes and in many cases in 60 seconds, or determine the flash point of a sample within a temperature range of 0 °C to 135 °C. The sample cup is heated / cooled by peltier cells. This gives very accurate and stable sub-ambient test temperatures and the benefit of rapid temperature normalisation between tests.
Ease of Operation
All functions on the Series 3 ActiveCool including test parameters, instrument status and test results are accessed via the touch screen display and push button. An audible prompt is sounded when a flash is achieved. An automatic flash detector reduces the chance of misinterpretation of the test result by the operator and enhances repeatability.
Innovative Design
The Series 3 ActiveCool Flash Point Tester is lightweight and suitable for mobile use when operated from the optional 12 volt power supply adaptor.
Supplied with: 2 ml syringe, Allen key, mains lead, quick start guide and instruction manual.
Temperature Range | 10 to 135°C |
Ignitor Type | Gas |
Cup Material | Stainless Steel |
Test Mode |
Rapid Equilibrium and Ramp |
Sample Size |
2 ml for flash points up to 100 °C |
Test Duration |
1 minute below 100 °C |
Ramp Rate |
2°C/min ramp |
Heating and Cooling System |
Peltier cell |
Power |
200 W (maximum) |
Voltage |
100/240 V 50/60 Hz |
There are no reviews yet
Recently viewed products
Setaflash Series 3 ActiveCool Flash Point Tester, Corrosion Resistant, Gas Ignitor
SKU | PSC-47-11399 |
MPN | 33250-3 |