LCD with 0.5 inch characters
Trend Indicating Arrows
Low Battery & Fault indication
Resolution 0.1 or 0.01

Auto Off after 20 minutes or continuous operation
Lowest Reading, Highest Reading, Average Reading
Switchable in Units of °F or °C
Display tenths or hundredths resolution

Glass-Filled Nylon Enclosure with silicone buttons and a durable polyester graphics window.
Nominal Body Dimensions: 5.0 x 1.7 x 0.85" (3 x 4.3 x 2.2cm)

5.3oz (150 grams)
– with 8" sensor

Resolution 0.01 Degrees

Calibrated Accuracy:
±0.1°F from 14 to 320°F
±0.06°C from -10 to 160°C
Range: -40°F to 400°F (-40°C to 204°C)
NIST Traceable Report of Test

Temperature Time Constant – 6.5 seconds in circulated water bath
(63.2% response to temperature change)

Temperature Change Stabilization – 19 seconds (0°C to 98°C +/- 0.1°C)

Microcontroller and precision 20 bit A/D Converter
FLASH memory
Recommended Temperature Range For best Accuracy 32 to 112°F, 0 to 44°C

Stainless Steel RTD temperature sensor

• 100Ω Shock resistant Thin Film RTD
• Standard 8"(20cm) or 12"(30cm) lengths
• Standard 0.25"(6.35mm) diameter with 0.188" (4.76mm) reduced tip
• Recommended Minimum Immersion Depth: 3" (7.6cm)

20mm Coin Size 3V Lithium, Duracell DL2032(IEC CR2032)
Over 100 hours Service Life at 70°F, 21°C
Battery Operating Range -4 to 130°F, -20 to 54°C
Note: Battery may not provide adequate power if ambient temperature is below -4°F, -20°C or above 130°F, 54°C