0.5" (12.7mm) character LCD
Switchable units °C or °F
Resolution 0.1 or 0.01
Low Battery & Fault indication
Continuous operation or Auto Off after 20 minutes.
Stores and displays Average, Lowest & Highest readings.
Arrows indicating increasing/decreasing temperature.
Recommended ambient temperature range: 32°F to 112°F (0°C to 44°C)

Stainless steel RTD temperature sensor
Static-dissipative plastic housing with a durable polyester graphics window.
Nominal body dimensions: 5 x 1.75 x 0.85" (13 x 4.4 x 2.2cm)

4oz (113 grams)
– with 8" sensor

Resolution 0.01 Degrees

Calibrated Accuracy:
±0.1°F from 14 to 320°F
±0.06°C from -10 to 160°C

Range: -40°F to 400°F (-40°C to 204°C)

NIST Traceable Report of Test
Standard 4 point calibration: 32°F(0°C); 120°F(49°C); 199°F(93°C); 300°F(149°C)

6 seconds in circulated water bath
(time response to 63.2% of temp. step change)

Stainless Steel RTD temperature sensor

• 100Ω Shock resistant Thin Film RTD
• Standard 8" (20 cm) or 12" (30 cm) lengths
• Standard 0.25" (6.35 mm) diameter with 0.188" (4.76 mm) reduced tip
• Recommended Minimum Immersion Depth: 3" (7.6 cm)

3V Duracell DL2032 coin cell
Over 150 hours service life at 70°F (21°C)
Ambient temperature operating range -4°F to 140°F (-20°C to 60°C)

Note: Battery may not provide adequate power if used outside operating range.