Stanhope-Seta

Provides reliable results for determining the particle concentration in air.

Compact bench-top instrument, used to prepare specimens in accordance with the test methods listed.

Provides automatic monitoring of up to four pressure test vessels and is designed for use with all water or dry block temperature baths that conform to the t...

Designed to carry out up to five simultaneous tests for determining existent gum content in fuels by the Jet Evaporation method.

Measures the induction period for oxygen in gasoline, and allows the weight of gum and residue in aviation fuel to be determined by direct weighing.

Determines particle concentration in oils with a viscosity up to 64 cSt. FFKM seals have been fitted to resist aggressive oils.

Used to feed viscous samples into AvCount2 (SA1000-2) and AvCount Lite (SA1800-0).

Compact solid block bath which can accept up to 12 sets of oxidation glassware and is suitable for TOST tests and as an alternative to liquid filled baths.

Compact solid block bath which can accept up to 6 sets of oxidation glassware and is suitable for TOST tests and as an alternative to liquid filled baths.

Heavy brass grease pot with screw lid and is designed for working light to medium greases before carrying out tests.

Determination of sediment in crude oils by membrane filtration.

The Stanomatic Dual Grease Worker removes the variations that can occur in the hand operation of grease workers, particularly with hard greases.

Determines low temperature flow characteristics of diesel fuels, gas oils and other distillate fuels.

Determines the density or specific gravity of light hydrocarbons including LP gases.

Recirculation in/out port for Seta series flash point testers.

Sintered brass filter support for use with the Setaclean Total Sediment Tester (16120-2).

Ignitor for use with the Multiflash Tag Flash Point Module (34400-0).

Replacement luer adapters for the Stanhope-Seta Multi-Filtration Tester.

Co-axial ignitor for use with the Multiflash Pensky-Martens Flash Point Module (34100-2) and the Multiflash Cleveland Flash Point Module (34300-2).

Pack of filter cartridges for use with the Vapour Phase Processor (SA4015-0).

Fuel ageing bath with 12 litre capacity and 6 air wells for ASTM D4870.

Replacement leveling leg/foot for the Stanhope-Seta series 8 flash point tester.

Small scale flash point material for use with various Seta Flash Point Testers.

Replacement lid and shutter assembly for Stanhope-Seta Multiflash Pensky-Martens module.