Petroleum Testing Equipment

Estimates the resistance of lubricating greases to water washout from ball bearings according to ASTM D1264.

Simulates the effect of squeezing grease between the rollers and the outer face of a roller bearing.

Provides reliable results for determining the particle concentration in air.

Compact bench-top instrument, used to prepare specimens in accordance with the test methods listed.

Provides automatic monitoring of up to four pressure test vessels and is designed for use with all water or dry block temperature baths that conform to the t...

Designed to carry out up to five simultaneous tests for determining existent gum content in fuels by the Jet Evaporation method.

Measures the induction period for oxygen in gasoline, and allows the weight of gum and residue in aviation fuel to be determined by direct weighing.

Determines particle concentration in oils with a viscosity up to 64 cSt. FFKM seals have been fitted to resist aggressive oils.

Used to feed viscous samples into AvCount2 (SA1000-2) and AvCount Lite (SA1800-0).

Compact solid block bath which can accept up to 12 sets of oxidation glassware and is suitable for TOST tests and as an alternative to liquid filled baths.

Compact solid block bath which can accept up to 6 sets of oxidation glassware and is suitable for TOST tests and as an alternative to liquid filled baths.

Heavy brass grease pot with screw lid and is designed for working light to medium greases before carrying out tests.

Determination of sediment in crude oils by membrane filtration.

The Stanomatic Dual Grease Worker removes the variations that can occur in the hand operation of grease workers, particularly with hard greases.

Determines low temperature flow characteristics of diesel fuels, gas oils and other distillate fuels.

Determines the density or specific gravity of light hydrocarbons including LP gases.

Pressure hydrometer cylinder to conform with ASTM D1657 and related specifications, built-in safety relief valve.

Accurately and reliably tests the dielectric strength of insulating liquids used in a wide variety of electrical apparatus.

The new standard in quantifiable iron corrosion detection.

Handheld instrument designed to provide fast, accurate and repeatable on-site measurement of biodiesel content in diesel fuel blends.

Detects solid hydrocarbon crystals according to ASTM D2386.

Determines sediment content of crude oil and fuel oils by extraction with toluene.

Determines the corrosive effects of fuels, lubricants and other hydrocarbon products on copper and silver.